HOME AUTOMATION

Laboratory for the study of the building automation technology.
Objective of the laboratory is to perform the automatic management of the buildings, both commercial and residential.

The performed functions are the following:
– control of the light
– control of the shutters
– control of the heating
– management of the loads
– display, information, operator control, monitoring and detection
– interfaces and other systems

PRODUCT	CODE	SHEET	SPECS
INTRODUCTION HOME AUTOMATION
BUILDING AUTOMATION CONFIGURATION
SINGLE PHASE POWER UNIT	DL 2101T70
EIBus POWER SUPPLY	DL 2101T71
PUSH BUTTON INTERFACE	DL 2101T72
DOUBLE PUSH BUTTON	DL 2101T74
SMOKE DETECTOR	DL 2101T75
TEMPERATURE CONTROLLER	DL 2101T76
PRESENCE DETECTOR AND BRIGHTNESS SENSOR	DL 2101T79
BINARY OUTPUT	DL 2101T80
UNIVERSAL DIMMER	DL 2101T81
SHUTTER ACTUATOR	DL 2101T82
VALVE ACTUATOR	DL 2101T83
INFRARED TRANSMITTER – RECEIVER	DL 2101T84
SCENE – EVENT CONTROLLER	DL 2101T85
TEXT DISPLAY/CLOCK SWITCH	DL 2101T89
USB INTERFACE	DL 2101T90
SOCKETS WITH LAMPS	DL 2101T91
VENETIAN DRIVE	DL 2101T92
TOUCH PANEL	DL 2101T95
VOLTAGE ADAPTATION MODULE	DL 2101T70VT
PLC LOGO! And EIB/KNX COMMUNICATION MODULE	DL 6BK1
ETS PROGRAMMING SOFTWARE	DL SW-ETS
THREE LEVEL FRAME	DL 2100-3M
CONNECTING LEADS	DL 1155EIB